Outdoor Flush Mount

I need to install an outdoor fixture on the side of my garage but I dont understand the instructions. Read on.

Here is the link to the instructions:

http://www.quoizel.com/instructionsheets/IS-835.pdf

My question is this....

I have vinyl siding on the outside of my garage. I am assuming I have to put an old work box there to mount the fixture to.

I dont understand how to make this flush against the siding.

Also, do I have to cut the siting to installl the old work box?

Step by step instructions will earn 10 points!

HELP!

First, you will have to use "an old workbox" we will call it an octagon box, and it will go on the exterior sheathing ( behind the vinyl siding), but mounted from the inside of the garage, not the outside. The work will be done from the inside. Only three holes will be drilled in the siding...one centered for the wiring, and two small horizontal holes for the mounting studs to project.

There are two ways to mount the fixture against the siding.

One, is to place the fixture against the irregular siding at a height that has the back of the fixture rest so it is vertical, not leaning in or out from the wall.
Two, is to purchase a vinyl mounting block from a homecenter for about $6 and hopefully you like the results. Not a perfect solution, but may be doable.

I recently did the same installation. , You will need to do the following things.

Purchase a vinyl mounting block, an octagon box, and longer screws to mount the lite.
Determine the exact location of the lite. Have access from the inside of the garage to the back of the outside wall to hook up wires and fasten box. Drill holes in siding (one for each mounting screw (2) and a hole for the wires. in the center about 1" diameter.

Do you have drywall? If so,
Determine roughly where the lite is going and neatly cut out a reasonable size square to work within the wall cavity. Make it large (stud to stud, and about 12-16" high. Save the piece. No need to make the project any more difficult by making a small hole. And, re-installing the cutout piece is easier than dealing with little access. This also will allow you to see there is nothing in the way of the box, and wiring.

To flush up to the siding using a vinyl mounting block.
First, determine the size siding you have. Measure vertically from pt to pt on the siding. You will most likely have 3, 4, or 8 inches. Go to a homecenter and ask for a vinyl siding mounting block for an exterior lite. It will be flat on the front for the fixture to rest, and saw-toothed on the back side to match the profile of the siding. I know they have 4" and comes in different colors. Its about $6 (If they dont have your size, I can only suggest making one out of wood.)

Next you will need an octagon box (for mounting lite fixtures)

Place the vinyl mounting block , if using one, or just the lite fixture on the exterior wall, where the lite will go. This will allow you to determine the location (height) of the octagon box. to be installed inside the garage. Mark the location and drill a hole (1") in the center of the location the lite mounts to the wall. This is the hole you will put the wires through.

Now, take the mounting strap from the hardware that came with the lite and screw it to box and adjust the strap (it rotates) to the horizontal postiion. Tighten! The holes in this strap is where you put the screws in that support the lite fixture. (The screws that come with the fixture are too short....you will need to replace them with longer screws ( I think 2" or 2 1/2" will do...you can get them at the homecenter)
Now, from inside the garage, place the box where you intend it to go, align the center of the box with the 1" hole you drilled, and mark the locations where the two fixture screws go. Drill these 2 holes ( 1/4" will do)

You now should know the exact location the box will set. From inside the garage, place the box where it will go, and mark
Now, inside the garage, anchor the octagon box tight against the exterior sheathing.

To anchor the box: I cut a pc of wood to go from one stud to the other in the opening. Then, determine where the box should be located along the pc of wood, mount the box to the wood (2x4) and fasten securely the wood with box to the studs on the left and right.
install wiring to box, and fish wires through to the outside.
You should now have a box mounted securely with wires and two mounting studs sticking out on the exterior. Hook-up wires and install fixture using the nuts on the studs.

Keep this in mind, you are installing something that is covered on the outside (no access) and basically the same on the inside, so each step gives you less and less access to the wires, and the mounting of the fixture. So, plan ahead.

Handyman Job - Add Exterior Lighting

Compare_______________________________________________

Woodbridge Lighting Glenwood 2-light Powdered Black Outdoor Flush Mount $80 Fixture finish: Powdered blackShades: Frosted glass Requires two (2) 13-watt max compact fluorescent GU24 base bulbs (included)

Woodbridge Lighting Glenwood 2-light Powdered Rust Outdoor Flush Mount $80 Fixture finish: Powdered rustShades: Frosted glass Requires two (2) 13-watt max compact fluorescent GU24 base bulbs (included)

Woodbridge Lighting Basic 1-light Powder Coat Black Outdoor Flush Mount $35 Setting: OutdoorFixture finish: Powder coat blackShades: Frosted glass

Woodbridge Lighting Basic 1-light Powder Coat Black Outdoor Flush Mount $40 Setting: OutdoorFixture finish: Powder coat blackShades: Frosted glass

Woodbridge Lighting Basic 1-light Powder Coat White Outdoor Flush Mount $35 Setting: OutdoorFixture finish: Powder coat whiteShades: Frosted glass

Woodbridge Lighting Basic 1-light Powder Coat Rust Outdoor Flush Mount $44 Setting: OutdoorFixture finish: Powder coat rustShades: Frosted glass

Woodbridge Lighting Basic 1-light Powder Coat White Outdoor Flush Mount $40 Setting: OutdoorFixture finish: Powder coat whiteShades: Frosted glass

---

_______________________________________________________

Compare_______________________________________________

1 Bulb Oil Rubbed Bronze Flushmount $31 MU7338: Features: -Flush mount.-Opal etched glass bowl shade.-UL listed for damp locations. Construction: -Steel construction. Color/Finish: -Oil rubbed bronze finish. Specifications: -120 Volts.-Accommodates (1) 75W medium base edison bulb (not included). Dimensions: -Overall dimensions: 5'' H x 10.5'' D. Collection: -Beckett collection.

1 Light Flush Mount $46 LLH1320: Features: -Flush mount.-Available in Brushed Nickel, Bronze or Matte Black.-Material: Metal frame / Glass shade. Specifications: -Accommodates: 1 x 60W medium base incandescent bulb.-Accommodates: 2 x 60W medium base incandescent bulbs.-Accommodates: 3 x 60W medium base incandescent bulbs. Dimensions: -Overall dimensions: 6'' H x 11.5'' W.-Overall dimensions: 7.63'' H x 13.5'' W.-Overall dimensions: 8.13'' H x 15.13'' W. Collection: -Huntingdale Collection.

1 Light Flush Mount $38.15 LLH1320: Features: -Flush mount.-Available in Brushed Nickel, Bronze or Matte Black.-Material: Metal frame / Glass shade. Specifications: -Accommodates: 1 x 60W medium base incandescent bulb.-Accommodates: 2 x 60W medium base incandescent bulbs.-Accommodates: 3 x 60W medium base incandescent bulbs. Dimensions: -Overall dimensions: 6'' H x 11.5'' W.-Overall dimensions: 7.63'' H x 13.5'' W.-Overall dimensions: 8.13'' H x 15.13'' W. Collection: -Huntingdale Collection.

1 Light Flush Mount $49 152F-1 Cobalt 1 Light Flush Mount

1 Light Flush Mount $38.15 LLH1320: Features: -Flush mount.-Available in Brushed Nickel, Bronze or Matte Black.-Material: Metal frame / Glass shade. Specifications: -Accommodates: 1 x 60W medium base incandescent bulb.-Accommodates: 2 x 60W medium base incandescent bulbs.-Accommodates: 3 x 60W medium base incandescent bulbs. Dimensions: -Overall dimensions: 6'' H x 11.5'' W.-Overall dimensions: 7.63'' H x 13.5'' W.-Overall dimensions: 8.13'' H x 15.13'' W. Collection: -Huntingdale Collection.

1 Light Opal Flushmount $16.02 Pictured in White - TGL3299: Features: -Flush mount.-Opal glass shade.-Energy saving.-Energy star. Options: -Available in brushed nickel, rubbed oil bronze or white finish. Construction: -Metal construction. Specifications: -Accommodates (1) 14W GU24 bulb (not included). Dimensions: -Overall dimensions: 5.25'' H x 10'' W.

---

_______________________________________________________

Compare_______________________________________________

8289-61 - The Great Outdoors - 8289-61 > Outdoor Flush Mount $75.9 Two Light Outdoor Flush Mount

9909-91 - The Great Outdoors - 9909-91 > Outdoor Flush Mount $83 Two Light Outdoor Flush Mount

1712BK - Hinkley - 1712BK > Outdoor Flush Mount $179 Camelot CollectionOutdoor Flush Mount

C9900CG - Troy Lighting - C9900CG > Outdoor Flush Mount $356 Gables CollectionOutdoor Flush Mount

CF9356NB - Troy Lighting - CF9356NB > Outdoor Flush Mount $370 Berksire CollectionOutdoor Flush Mount

C2080BI - Troy Lighting - C2080BI > Outdoor Flush Mount $238 Biscayne CollectionOutdoor Flush Mount

---

_______________________________________________________

Compare_______________________________________________

RESTORATION HARDWARE VALENCIA OUTDOOR FLUSHMOUNT $219.00

Great Outdoors by Minka Marietta Outdoor Flush Mount 8799-161 $139.90

Great Outdoors by Minka Heron Bay Outdoor Flush Mount Lantern in Black 8970-66 $71.10

Kichler 9881TZ Tannery Bronze 2 Light Down Light Outdoor Flushmount Ceiling $94.00

Great Outdoors by Minka Segovia Outdoor Flush Mount in Vintage Rust 8209-61-PL $119.00

SOLID BRASS KICHLER OUTDOOR FLUSH MOUNT OUTDOOR LIGHT K-9816 NEW STREET $9.99

Nuvo 1 Light Outdoor Ceiling Flush Mount 60-534 White Exterior Spider Cage $35.00

Kichler Lighting Amesbury Collection Outdoor Flush Mount Ceiling Light - #9806TZ $45.00

Indoor/outdoor flush mount light white frame w/texture glass and pullchain 2 Blb $9.99

Quoizel French Quarter Outdoor Flush Mount Antique Brown FQ1613AW01 $179.99

Kichler Incandescent Outdoor Flush Mount in Painted Black 345BK $33.00

Tiffany Style Exterior Outdoor Flush Mount Ceiling Light Lighting Fixture BRONZE $161.99

Artcraft Lighting AC8566OB Oiled Bronze Outdoor Flush Mount from the Annapolis $142.00

Trans Globe Spider Web Wheel Flush Mount Ceiling Fixture Outdoor PL-40582 Black $14.95

Stainless Steel Wood Deck Lights Landscape Flush Mount Outdoor LED Dock $14.99

Quorum International 3919-9-86 Oiled Bronze Two Light Outdoor Flush Mount $109.00

Murray Feiss Outdoor Lantern - Flush Mount OL7613HTBZ $151.99

Craftmade Vale Outdoor Flush Mount in Oiled Bronze Z4307-92 $99.00

Quorum 3080-7-33, 1 Light Outdoor Flush Mount in Cobblestone, New In Box $28.50

Quorum 3080-7-6 1 Light Outdoor Flush Mount In White, New In Box $24.50

Hampton Bay 240216 Flush mount Outdoor White Lantern $20.20

Murray Feiss Outdoor Lantern - Flushmount OL6413ATS $159.99

Heritage Bronze Outdoor Lantern - Flush Mount $153.99

NEW 1 Light Outdoor Flush Mount Ceiling Fixture, Black, Amber Glass, Artcraft $248.00

NEW 1 Light Outdoor Flush Mount Ceiling Fixture, Oil Rubbed Bronze, Amber Glass $248.00

RESTORATION HARDWARE CAMBRIDGE OUTDOOR FLUSHMOUNT BRONZE $229.00

NEW 2 Light Mission Outdoor Flush Mount Ceiling Lighting Fixture, Bronze, Honey $101.07

Quorum International 3040-12-95 L7 Outdoor Flush Mount Light With A Old World F $172.00

Quorum International 3348-12-86 Palomar Outdoor Flush Mount Light With A Oiled B $129.00

Quorum International 7931-2-45 Outdoor Flush Mount Light With A Baltic Granite $57.50

Quorum International 7930-1-45 Outdoor Flush Mount Light With A Baltic Granite $34.80

Quorum International 3390-15-86 Silo Outdoor Flush Mount Light With A Oiled Bron $185.00

Quorum International 3916-11-86 Larson Outdoor Flush Mount Light With A Oiled Br $95.50

Quorum International 3707-2-93 Dover Outdoor Flush Mount Light With A Charcoal $133.56

Quorum International 3901-13-63 Riviera Outdoor Flush Mount Light With A Golden $125.00

Quorum International 7930-1-72 Outdoor Flush Mount Light With A Rustic Silver $34.80

Quorum International 3222-12-91 PRESIDIO Outdoor Flush Mount Light With A Silver $206.00

Quorum International 7931-2-72 Outdoor Flush Mount Light With A Rustic Silver $57.50

Quorum International 3080-9-33 Outdoor Flush Mount Light With A Cobblestone Fin $41.50

Quorum International 3080-9-65 Outdoor Flush Mount Light With A Satin Nickel F $41.50

Quorum International 7933-1-45 Outdoor Flush Mount Light With A Baltic Granite $36.00

Quorum International 3503-13-86 Sorrel Outdoor Flush Mount Light With A Oiled Br $134.00

Quorum International 3919-9-86 French Quarter Outdoor Flush Mount Light With A O $109.00

Quorum International 3500-14-45 ARTS & CRAFTS Outdoor Flush Mount Light With A B $206.00

Quorum International 3400-12-43 Georgia Outdoor Flush Mount Light With A Etrusca $189.00

Quorum International 3221-10-45 Sloane Outdoor Flush Mount Light With A Baltic G $171.00

Quorum International 3910-13-43 Rochelle Outdoor Flush Mount Light With A Etrusc $149.00

NEW 3 Light Outdoor Flush Mount Ceiling Lighting Fixture, Black, Clear Glass $59.90

NEW 1 Light Mission Sm Outdoor Flush Mount Ceiling Fixture Bronze, Tiffany Glass $109.90

NEW 2 Light Mission Md Outdoor Flush Mount Ceiling Lighting Fixture, Green Brass $159.90

NEW 2 Light Rustic Tree Outdoor Flush Mount Ceiling Lighting Fixture, Bronze $91.99

NEW 2 Light Rustic Pine Cone Outdoor Flush Mount Ceiling Lighting Fixture Bronze $126.64

NEW 3 Light Outdoor Flush Mount Ceiling Lighting Fixture, Bronze, Beige Glass $65.90

NEW 3 Light Mission Outdoor Flush Mount Ceiling Lighting Fixture, Green Brass $299.90

NEW 2 Light Outdoor Flush Mount Ceiling Lighting Fixture, Bronze, 25 Yr Warranty $66.00

NEW Light Rustic Pine Cone Outdoor Flush Mount Wall Lamp Lighting Fixture Bronze $73.84

Progress Polycarbonate Outdoor One-Light Flush Mount - P7340-30EB $83.88

NEW 1LT AGED BRONZE WITH CHAMPAGNE FROST GLASS OUTDOOR FLUSH MOUNT $120.00

Kichler 9557PSS316 Polished Stainless Steel 1 Light Outdoor Flushmount Ceiling $278.00

78195-846 Outdoor Flush Mount Fixture-Stardust Finish $132.93

78240-780 Outdoor Flush Mount Fixture-Burled Iron Finish $124.00

Livex Lighting Montclair Mission Outdoor Flush Mount in Verde Patina 2146-16 $299.90

NEW Hampton Bay Flush-Mount 2-Light Outdoor Augustain Bronze Lantern 161401 $60.00

NEW 2 Light Outdoor Flush Mount Ceiling Lighting Fixture, Gold Brass, Sand Glass $77.97

Minka Lavery Outdoor 71199-A357-PL Delancy Craftsman Mission 2 Light Flush Mount $159.90

---

_______________________________________________________

The Fundamentals Of Ceiling Fans

Ceiling fans are a basic necessity for the summer season. However, there are certain things that must be remembered while purchasing a ceiling fan.

To begin with, it is very essential to choose the right size of fan, according to the room dimensions. Blade span of a ceiling fan ranges from 29" to 54". The room where the ceiling fan is to mounted must be measured. Here are certain recommended fan sizes according to room dimensions:

Room Dimensions

Up to 75 sq. ft – Recommended fan size = 29-36 inches

76-144 sq. ft – Recommended fan size = 36-42 inches

144-225 sq. ft – Recommended fan size = 44 inches

225-400 sq. ft – Recommended fan size = 50-54 inches

Mounting Systems

It is recommended that the ceiling fan be mounted in the center of the room. Also, it must be about seven feet from the ground and about 18" from the walls. If it is possible, install the fan at the height of 8 to 9 feet from the ground.

Standard Mount: This is a three to five inch down rod (a metal pipe that reaches to the top of the fan from the ceiling). The diameter of the down rod is generally between 1.5" to ¾".

Extended Mount: This is used to hang the fan at an 8 to 9 foot height from the floor if desired. These down rods are available in about 6 to 120 inches. Ask the manufacture to determine the right size of down rods according to your need.

Flush Mount: This anchors the fan right to the ceiling. Generally, a standard fan can also be used as a flush mount; but still, "hugger" or "low profile" ceiling fans are available for the purpose.

Sloped Mount: This is used for angled or domed ceilings.

Wet or Damp Rating

When installing a ceiling fan in a bathroom or other humid places, it is recommended to go for a fan that is UL "damp" rated. When installing fans in a patio or front porch, look for a "wet" rating, as they are exposed to water.

All the components of the fan together affect the working of the fan and thus define the performance of the fan.

Other Components

Motor: There are two types of motors; one that is sealed and lubricated, and another with oil ball bearings. There is hardly any need of maintenance to the motors with sealed bearings, while motors with an oil bath require frequent oiling.

Motor Housing: This is the decorative part of the fan, which surrounds the fan motor. Fans with heavier materials are likely to cause less vibration. This also provides more stability to fans with longer down rods.

Other features that ensure longevity comprise of heavy-duty windings, accurate engineering bearings and shock-absorbency. These features are generally found in the expensive ceiling fans.

Blades: The angle of the blades of a fan is called pitch. It is determined in degrees. Blades with higher pitches move more air that is provided in cubic feet per minute. However, it is solely not responsible for the air movement. Other factors like motor design as well as speed, blade design, and various others affect the amount of air movement.

To provide variety in design, manufacturers offer a wide range of blade styles in different models. However changing the blade style can negatively affect the fan's performance.

About the Author

Stefan Rockhaus provides interior decorating tips. Visit ceiling fans info to read more about ceiling fans

 Mail this post